 | All our Pop Up & Drag Up Units are only designed for us on installations fitted with RCD Protection For a professional finish, use with our optional flush fit adaptor ring! | 100mm Diameter Pop Up Power Unit with 2x UK Power Sockets & no Data. Just peel back the protective film and drop it in a predrilled hole ready to go. Supplied with a standard 2 metre lead and fitted plug for any UK Standard 3 pin socket - just like an extension socket! The Bright Chrome Top Disc compliments the Two-Tone Black & Chrome surround and you just depress the Black button to 'pop-up' the unit about 25-30mm - and then draw it into position. This unit is predominantly manufactured from a quality Zamak (Metal) material and will add a real wow factor to a kitchen, workspace or any prestigious development, where power or data distribution is required. We recommend you get a professional to install this unit, especially if you are intending using the 'Make Flush' Adaptor, which will require a counterbored hole! Useful Technical Data Approx. Column Height when fully extended, from top or worktop - 190mm
Overall Outside Diameter of Top Plate with Depress Button - 120mm
Suggested Hole Size Required - 101mm but use a test template if in doubt
Thickness of Top when used without a 'Flush Fit' Adaptor - 7mm
* Approx. Depth required when retracted fully - 260mm
(* the depth required is measured from the TOP of the worktop & includes space for the wires/cables to exit the bottom of the unit, so worktop thickness can be taken off this figure. As with all our products they're listed as if you wanted to buy them individually so for quantity discounts, check the drop downs first, or give us a call and we'll quote you for your specific requirements. All the prices on the site include VAT and we endeavour to keep our prices as keen as possible but if you think you can buy the product cheaper elsewhere then please let us know. It may also be worth checking our Discounted Stock section where we've got end of line and slow moving colour options at significantly reduced rates. As well as owning our own tooling, we source innovative products in a wide variety of colours and finishes, from all around the globe so inevitably you will come across products which aren't stocked here in Banbury. Delivery on these parts would usually be 4-5 days instead of our typical 1-2 days service and in some situations, these parts have been set up with minimum pack requirements which might mean it won't let you order less than that - so check the drop-downs in this instance. To make choosing the right product a bit easier, we've signified ex-stock items by attaching a You Save: icon to them, so if you're looking for a quick turnaround, or hoping to order in smaller batches - check there's not an alternative product with a You Save: icon next to it first!
|
